After some rainy days, it dawns on you that the lawn in front of your house has grown out so fast, and you really need to cut it off to make your surroundings perfect again. If so, what you need is a weedeater.
But if you are new to this gardening tool, it seems to be a bit of a hassle to get everything right. As stringing a weed eater is just one minor phase in the assembly of a string trimmer, it is sometimes carelessly neglected and finished.
Bear in mind that every single step contributes significantly to your work efficiency. So how to string a weedeater? Continue to find out the answer in the following article!
[toc]
Basic Information About A Weedeater
Before diving deeper into our guidance, let’s walk through some basic information about weedeaters.
The common name of a weed eater is a string trimmer. Weed Eaters are lightweight tools that work with a rapidly rotating microfilament string.
A weed eater is considered a garden machine, mostly used for cutting grass. In the farming sector, it is considered as a breakthrough, as weed eaters have surpassed every other cutting methods. Mechanically, a string trimmer functions close to a lawnmower.
Weed Eaters are used for cleaning up after mowing — in roads, gateways, or tight spaces that are not convenient for the laundry mower. For these jobs, you may not need much strength, but versatility and comfort are the main reasons why cable-free or electric grass trimmers are the best alternatives. The edger modification is also added.
There are different types of the weed eater and you can choose from this wide range, depending on your workload.
You can use a medium weed eater, which is thin, lightweight, and convenient to clean your garden once or twice a week. This kind of weed eater can significantly aid you in your work and does not require a lot of time or resources.
If you are facing a quite heavy-duty task, we suggest you purchase big trimmers to cut down the lawn quickly. They are often called brush cutters, which require dual-handed operation and enable the use of the metal blade to cut the dense wooden brush.
Step-To-Step Guidance On How To Put String on Weedeater
Now let’s come to your favorite part! Stringing a weed eater will be simple as a piece of cake in the event that you give it a little care and a thorough investigation. Let’s check it out!
Instructions on how to put a string on weedeater:
1. Separate the Spool
First, push the taps or flip them, so that the holding ring connected to the head of the weed eater can be changed. Keep in mind that different weedeater is associated with varying strategies for separating the spool from the head of the weed eater.
2. Cut the String
After that, cut the rope in the range of 15 to 25 feet, depending on the size of the spool. Don’t worry about cutting the chain longer than the requirement, because when you wind the reel, you can remove the additional ends. If you choose a two-string weed eater, then repeat cutting for the second string.
3. Move the String
Find the tiny hole(s) in the spool core. After that, move the plastic string through the cavity by around half an inch. The spool is then separated into two parts. There’s one hole(s) per section.
4. Obey the Arrow Path of the Spool
When the string goes through it, obey the arrow path of the spindle. In other words, before you overlap, you must wind this line to the spool so that it doesn’t tangle when used.
This is done. If your weed eater has two strings, just repeat this step on the other side of the spool and remember to leave every end of your model 6 inches unwound.
5. Hold the String
Break the end of the chain through the hole, typically on the bottom of the conduit. The main function of the grooves is to hold the string so it does not unwind when the spool is replaced.
6. Place the Sponge Back
Within the weed eater’s head, place the sponge back where it belongs. when finished, simply release the loose length of the string from the aforementioned notches.
You would then have to feed the loose ends through the eyelets of the trimmer, known as “panel outlets,” found in the trimmer head. Do it again for the second string, as normal, if your pattern has one.
7. Snap the Holding Ring
Snap the holding ring back into place or hold on the trimmer head if needed. Sweep the retaining ring around a little to make sure it’s secure. That’s all to do to string your weed eater.
Tips: How To Make Your String Last Longer?
Stringing the weed eater, even with a detailed guide, remains a tedious task. Even worse, a few minutes after you feed it, your stringing can cause problems to the trimmer.
Such a pain in the neck!
Is there any way to make strings last longer? Fortunately, there are several effective solutions. Scroll down to know!
1. Tips for Weed Feeding
When feeding the spool, it is essential to keep the cords parallel to the ground. This avoids the strings hitting dirt or rocks.
Feed new string only when you ask for your weed whacker. But how could you know that? You might be asking. Our recommendation is to “listen” to the trimmer. You may need some practice, but saving strings for more use is worth the effort. If not, you may run out of strings pretty quickly.
2. String Type
The lifespan of a string depends on a series of factors.
First, we have the string size, which plays a key role in determining the length of your string. Cord sizes are available in three main types, lightweight, medium-heavy, and very heavy.
We believe that you should switch on a metal blade when you can not cut the grass with or above 0.095 string.
The second factor is the form of the string. On the market, there are circular, multi-faceted, diamond, and twisted strings, etc.
In terms of consistency and longevity, our knowledge shows that multi-side strings are safer than circular strings.
3. Hold the Cords
You obviously need to protect the cords for a longer lifespan.
Do not expose strings to direct sunlight. It is advisable to water them when the temperature is too hot to avoid thermal disruption. The thicker the lines are, the longer they are to be swallowed.
Another trick is to keep the strings filled with a damp towel in a plastic bag.
Last but not least, stop the full throttle of the weed eater. You know, the full-speed trimmer can generate heat which could melt the lines and cause line welding.
Therefore, set the throttle to a sufficient height when cutting down the plants. Most of the time, you don’t need to activate the full-throttle mode.
Final Thoughts
Gardening once in a while may give us a splitting headache if we don’t know how to string weed eater – a fundamental tool for the basic work of gardening.
In this post, we have guided you on how to string a weed eater. In accordance with our step-by-step tutorial, you will enjoy gardening. Have a pleasant time in your garden!
Leave a Reply