Do you know that you have to change the spool of your Qualcast strimmer usually? No? It’s alright!
In this article, we will give you in-depth instruction on how to replace Qualcast strimmer spool and explain the reason why you have to do that. Believe us, this job is not hard and will not take much of your time.
If you are ready, then dive into the details now!
[toc]
Why Do You Need To Change The Qualcast Strimmer Spool
A strimmer seems to be so familiar with gardeners. It is a good machine that can help you quickly clean your grassy garden without breaking a sweat.
However, you have to change your spool often. That makes you wonder why you have to do that, right?
Do not panic as it is very understandable. The reason is, the strings of the spool can break after a time of use. If the strings break, you are not able to use the trimmer.
In order to continue using the machine, you have to insert a new line. This line is wound closely on the trimmer spool.
As the machine runs to trim the grass in your garden, it will wear out from the spool. And when the wearing out process is finished, the spool will break off, making the strimmer useless.
Now you have already known how important changing the spool is. You must be very curious about how to replace Qualcast strimmer spool step by step, right? Let’s move to the next section immediately!
How To Replace Qualcast Strimmer Spool?
This is your most expected part, right? You don’t have to wait any longer. Here come the 5 easiest steps of how to replace Qualcast strimmer spool!
Step 1: Get Rid of The Head Spool
The very first step you have to do is get rid of the head of the strimmer. If you remove it completely, the spool will immediately appear in front of your eyes. Then, you will find a small hole inside it.
Do you know what? This is the spot to begin the strimmer line. On the other hand, you can find some arrows on the spool as well. These arrows are applied to indicate line directions.
While you are getting rid of this spool, do not forget to turn off the machine or disconnect it from the power source if you do not want to be injured.
After having done this job, you can see the spool underneath the cutting head.
Next, you should separate them by spinning the head clockwise or in the opposite direction until the clip is loosened up. Now, you have the spool released.
Step 2: Make The Spool Empty
It’s time to empty the spool. Don’t underestimate this step because it is really necessary. Without it, you have no chance to insert the new line into the spool.
For other parts, attempt to take out as much as you can. Especially, you have to eject the old line so that you can insert the new one in.
While making the spool empty, you can also take this chance to clean up the spool. Use a towel and add some water to it.
Then wipe the spool carefully to clean all dust, stain, and debris. In fact, this step seems redundant to many people but we still recommend you do this.
Do you know why? Well, this action can help your machine become more durable and work better in the future.
Step 3: Install a New Line and Wind It
Have you done making the spool empty? If yes, you are now able to install a new line and wind it.
At the very beginning, you should hold the new strimmer line and put it into the hole of the spool. Do you remember the arrows we have said above? Follow this direction to wrap the line in rows.
If you want the line to feed greatly from the strimmer, you need to wrap it as straight as possible. In case you fail to do so, we advise you to take the line out and rewrap it one more time.
A waste of time as it may look like, it can ensure that nothing goes awry when you start working.
Step 4: Assemble The Spool to The Strimmer
Now, you have completed wrapping the line as our guide. All you need to do next is simply just assemble the spool back to strimmer. Be careful because this may be tricky a little bit.
You should look closely, turn the spool, and try to find the right joints. Anyway, taking out the spool is still easier than doing it in reverse.
Remember: You do not have to do it quickly, stay calm, and do it slowly and carefully.
Step 5: Recheck the Line
The last step you need to accomplish is to recheck the line. This process is to make sure that there is no problem with your strimmer.
Open the machine and cut some grass in a small area for testing. If the trimming line looks bad, you should come back to step 3 and do it again.
On the opposite side, when everything is already ok, you can begin to cut at the larger area.
Some Small Tips that You Have to Remember
After learning the 5 steps of how to replace Qualcast strimmer spool above, you are now able to do the job with ease.
However, if you want to complete the work perfectly, you should refer to some of our small tips.
Get the Right New Spool
Every strimmer requires a different kind of spool and line to work properly. Therefore, it is necessary to buy the right new spool.
In addition, there is even spool that helps you save money but provides more lines for longer use on the market. So make sure that you ask the provider and check out the products carefully before making the buying decision.
Don’t Force It
As we have said above, just do the job slowly and carefully, and everything will be alright. In fact, this job is not difficult to do, but it will be really hard if you are a careless person.
The spool after is forced too much can be broken down. And then you will have to buy another product and do the job again. You do not want to waste money on this silly situation, right?
Conclusion
In conclusion, we have taught you how to replace Qualcast strimmer spool. As you can see, this work is totally not difficult. All you need to do is follow our steps and apply them carefully.
If you get any trouble, don’t be afraid to contact us. We will reply to you without further delay.
And now, many thanks for your time!
Leave a Reply